QI CERTIFICATION WIRELESS CAR CHARGING: The car wireless charger after qi certification is available for Samsung Galaxy S8, S8+/ S8 Plus, S7, S7 Edge, Note 5, Note 7, S6 Edge Plus, iPhone 8, iPhone 8 Plus, iPhone X and all devices that support wireless charging.
CONSIDERATE DESIGN: The magnetic car mount holder can be rotated 360 degrees and tilted up or down 15 degrees to provide an optimized visual image. Aluminum cover, silicone anti-skip pad, strong sticker and magnets (If the magnetic force is not strong due to the thick phone case, please stick the metal ring which included in the package).
USE: Wireless mount car charger can be used not only for car vent installations, but also be used for office, home, dashboard or any flat place you want to use.
CHARGING: This QI wireless car mount is for thin shell within 3 mm or direct charge, the icon blue: charging.
Warranty: 1year free repair service, 30 days no reason to return policy, if you have any questions, please contact us.
Material: ABS + Magnet + Silicone
Input: DC 5V 1.5A/2A
Output: DC 5V 1A
Conversion Rate: 70%
Dimension: 2.56in(diameter) 2.16in(height)
Cable length: 1m/ 3.28ft
Stand by State:Bright blue light in the middle
Charging:Bright blue light below
What's in the box
1 x A Renbon Wireless Car Charger
1 x Micro USB Cable
2 x Magnetic Ring
1 x Magnetic Ring Instructions 1 x Magnetic Wireless Car Charger Instruction manual
Q: How to install the metal ring?
A: First remove the blue and white adhesive tape above it. Then place it in the middle of the mobile phone back or in the middle of phone case (The phone case must be non-metallic and the thickness must be less than 3mm, due to the metal ring material and sticky, don't easily move the iron ring to prevent scratching the phone.) Then cover the cell phone cover.
Need note that when charging, align the iron ring to the phone with the charger so that the charger can firmly hold the phone through the iron ring.
Q: How much of the thickness of the phone case can be used in this car charger?
A: The thickness of the phone cover doesn‘’t exceed 3mm, if more than this thickness, the charging will be intermittent and will not even charge.
Q: Why is charging always disconnected when driving?
A: 1. The adapter requires a 1.5A or 2A charging head.
2. There is a deviation in the position of the mobile phone placed on the charger. This may cause the charging to be stopped (the package contains the operation manual. Please read it carefully).
Q: Do you have QI certification and can provide QI certification?
A: Yes, our wireless car charger is QI certified and can provide official certification.
Renbon Wireless Car Charger W5，Magnetic Car Wireless Charger Mount，Wireless Charging for iPhone X iPhone 8/8 Plus Samsung Galaxy Note 8/S 8/S 8+/S 7/S 6 Edge+/Note 5 And All Q I-Enabled Devices - B07795K45G